Application of Vis–NIR hyperspectral imaging in classification between fresh and frozen-thawed pork Longissimus Dorsi muscles

Fresh and frozen-thawed (F-T) pork meats were classified by Vis–NIR hyperspectral imaging. Eight optimal wavelengths (624, 673, 460, 588, 583, 448, 552 and 609 nm) were selected by successive projections algorithm (SPA). The first three principal components (PCs) obtained by principal component analysis (PCA) accounted for over 99.98% of variance. Gray-level-gradient co-occurrence matrix (GLGCM) was applied to extract 45 textural features from the PC images. The correct classification rate (CCR) was employed to evaluate the performance of the partial least squares-discriminate analysis (PLS-DA) models, by using (A) the reflected spectra at full wavelengths and (B) those at the optimal wavelengths, (C) the extracted textures based on the PC images, and (D) the fused variables combining spectra at the optimal wavelengths and textures. The results showed that the best CCR of 97.73% was achieved by applying (D), confirming the high potential of textures for fresh and F-T meat discrimination.     

Assessment of local strain field in adhesive layer of an unsymmetrically repaired CFRP panel using digital image correlation

The present study focuses on experimental investigation of through the thickness displacement and strain field in thin adhesive layer in single sided (unsymmetrical) patch repaired CFRP (carbon fiber reinforced polymer) panel under tensile load. Digital image correlation (DIC) technique is employed to acquire the displacement and strain (longitudinal, peel and shear) field. Experimental determination of shear transfer length based on shear strain field obtained from DIC is introduced to estimate the optimum overlap length which is an essential parameter in patch design for the repair of CFRP structures. Further, DIC experiment with magnified optics is performed to get an insight into complex and localized strain field over thin adhesive layer especially at critical zones leading to damage initiation. The failure mechanism, load displacement behavior, damage initiation and propagation are closely monitored using DIC. The influence of patch edge tapering on strain distribution in adhesive layer is also investigated. The DIC successfully captures the global and localized strain field at critical zones over thin adhesive layer and further helps in monitoring the damage based on strain anomalies. Strains are found to have maximum magnitude at the patch overlap edge and the shear strain level in adhesive layer is higher than the peel strain. Normal tapering increases the peel strain and has negligible influence on shear strain level in adhesive layer. The recommended overlap length is found to be consistent with the recommendation in the literature. Whole field strain pattern and the overlap length obtained from experiment are further compared with the finite element analysis results and they appear to be in good coherence.     

A study on the possibility of implementing a real-time stereoscopic 3D rendering TV system

3D video has recently seen a massive increase in exposure in our lives. However, differences between the viewing and shooting conditions for a film lead to disparities between the reformed media and the original three-dimensional effect, which cause severe visual fatigue to viewers and result in headaches and dizziness. In this paper, a series of image processing algorithms are introduced to overcome these problems. The image processing pipeline is composed of four steps, eye-pupil detection, stereo correspondence computation, saliency map generation, and 3D warping. Each step is implemented in an S3DS-3D rendering system and its time complexity is measured. From the results, it was found that real-time stereoscopic 3D rendering is impossible using only a software implementation because SIFT and optical flow calculation requires a significant amount of time. Therefore, these two algorithm blocks should be implemented with hardware acceleration. Fortunately, active research is being conducted on these issues and real-time processing is expected to become available soon for applications beyond full-HD TV screens. In addition, it was found that saliency map generation and 3D warping blocks also need to be implemented in hardware for full-HD display although they do not have significant time complexity compared to SIFT and optical flow algorithm blocks.     

Synchronous fluorescence and multivariate classification analysis as a screening tool for determining Sudan I dye in culinary spices

Spices are a globally traded commodity which has been found to be adulterated with forbidden Sudan dyes. This work proposes a screening method for determining the adulteration of paprika varieties (mild, hot and smoked) with Sudan I dye, based on constant-wavelength synchronous fluorescence spectroscopy with multivariate classification. Different wavelength-intervals (Δλ) were evaluated. Classification models were built with Partial Least Squares-Discriminant Analysis (PLS-DA) at two Sudan I dye concentration levels (1 and 5 mg L⁻¹) and they were tested with samples at a lower level (0.5 mg L⁻¹). Classification results were quite satisfactory when a strategy based on first-derivative spectra was used for improving classification results. Δλ = 60 nm was chosen as the optimum wavelength interval giving a 100% of sensitivity and specificity. These results are promising because the risk of assigning adulterated samples as safe to be consumed is highly minimized. The proposed method is feasible, rapid and simple taking advantage of Sudan I fluorescence phenomena in a direct way.     

Non-chaotic and chaotic propagation of stationary and dynamic images through MVKS turbulence

Anisoplanatic electromagnetic (EM) propagation across a turbulent atmosphere has been recently examined for an unmodulated carrier propagating over an image-bearing transparency through optical lensing, and for the embedded information inside a carrier recovered using heterodyning and digital demodulation. Carrier modulation yielded better recovery than simple lens-based imaging. A possible mitigation strategy is proposed whereby the image information is encrypted on an RF chaotic carrier, thereafter secondarily embedded onto an optical carrier. Results based on the modified von Karman (MVKS) and the Hufnagel-Valley (H-V) models showed that the signal/image recovery under turbulence is improved compared with non-chaotic propagation. The case of time-varying/dynamic images is also taken up; it is demonstrated via cross-correlation products that turbulence is mitigated by the use of chaotic carrier encryption. Overall, transmission via chaos offers mitigation against distortions due to turbulence along with the security feature inherent via the chaos keys which prevent signal recovery without key-matching.     

Novel data structure and visualization tool for studying technology evolution based on patent information: The DTFootprint and the TechSpectrogram

We introduce a new, bespoke data structure to analyze and visualize the evolution of a technology. The technology under analysis is defined by a set of patents corresponding to a technical field, owned by a company or invented by a team of research. Our data structure, the Dynamic Technology Footprint –DTFootprint–, facilitates the analysis and visualization of trends and dynamics of a given technology, and therefore the evolution of a technical field, a company, or a team of people. A graphical tool based on our data structure is defined, it is named Technology Spectrogram –TechSpectrogram–, because it is inspired by the acoustic frequency spectrograms: as the acoustic frequency spectrograms visualize the dynamics of an acoustic wave showing the evolution of its frequency components our tool shows the dynamics of a technology showing the evolution of its technological components, which are represented by the whole set of IPC-codes. Our graphical tool, the TechSpectrogram is shown for some study cases, and its application to the history of technology and technology management are disclosed.     

Terrain classification and adaptive locomotion for a hexapod robot Qingzhui

Frontiers of Mechanical Engineering - Legged robots have potential advantages in mobility compared with wheeled robots in outdoor environments. The knowledge of various ground properties and...     

基于kmeans-SVM的二叉树粗分类方法

针对大型数据库中进行匹配识别时存在识别速度慢、时间长、影响实时应用效果的问题,提出了一种树形层次结构的粗分类方法。通过k-means得到两类粗分类的样本,用这两类粗分类数据训练SVM分类器,找到分类超平面,再不断调整分类超平面,最后构建二叉树型结构达到粗分类的目的。三个方法相结合很好地缩小目标的搜索范围,提高了识别时候的效率。     

Discriminative graph convolution networks for hyperspectral image classification

Recently, the proposal of graph convolutional networks (GCN) has successfully implemented into hyperspectral image data representation and analysis. In spite of the great success, there are still several major challenges in hyperspectral image classification, including within-class diversity, and between-class similarity, which generally degenerate hyperspectral image classification performance. To address the problems, we propose a discriminative graph convolution networks (DGCN) for hyperspectral image classification. This method introduces the concepts of within-class scatter and between-class scatter, which respectively reflect the global geometric structure and discriminative information of the input space. The experimental results on the hyperspectral data sets show that the proposed method has good classification performance.     

基于混合远景和近景区域暗通道算法的图像去雾研究

为了提高图像去雾效果,提出混合远景和近景区域暗通道算法。首先建立远景和近景区域暗通道,为近景区域最小值通道和远景区域最小值通道之和,不同区域设置不同的调节系数;接着估计大气光值,通过混合暗通道远景区域的前50个像素点颜色值的平均值获得,增设校正系数;然后导向滤波,采用自适应滑动窗口优化透射率;最后给出了算法流程。实验仿真显示所提算法去雾图像视觉效果较好,定量分析指标对比度、可见边对比度值较优。